SC51F3364 bases on powerful SC51 CPU core, and embeds 64K-byte FLASH and 2K-byte RAM. It integrates high precision oscillator, comparator, voltage detector, carrier modulation and demodulation module and three configurable timers, which is very suitable for self-learning remote control.
Features:
8 bit SC51 CPU
Compatible with MCS51 instructions, dual DPTR; support software trap instruction.
Improved instruction structure, the execution time of 90% instructions is two to four clock cycles.
On-Chip Memory
64K-byte FLASH, data retention time > 10 years;
Erase page size: 1K; 20000 times erasing;
2K-byte RAM.
Programming
Support In-Application-Programming (IAP), support IAP protection;
Support In-System-Programming (ISP), only 5-pins are needed (including VDD/VSS);
Support software IP protection (MOVC instruction is forbidden);
Support page encryption, page size: 1K;
Support Parallel Programming Interface.
Power supply and Reset
Operating voltage: 1.8V~3.6V;
Built-in 1.8V MVR (main voltage regulator) and LPVR (low power voltage regulator);
Built-In Power-On-Reset (POR);
Built-In Low-Voltage-Reset (LVR) with 2 levels selectable: 1.6V, 1.7V;
Built-In Low-Voltage-Detect (LVD) with 16 levels selectable;
Built-in watchdog timer(WDT).
System clock
Built-In 20KHz low frequency Oscillator (RCL);
Built-In 16MHz high precision Oscillator (RCH);
CPU maximum operating frequency: 16MHz @ 1.8~3.6V;
Frequency division available with division factors1/2/4/8.
I/O
27 I/O Ports in maximum;
4 modes for each IO: floating input/pull-up input/push-pull output/open-drain output;
2 levels sink current available at P1;
Built-in large current driver TR, 2 levels sink current available: 200/250mA @VDD=3V, VOL=0.3V;
Polarity configurable Keyboard-Interrupt (KBI) wakeup interrupt at P0/P1/P2;
4 channel polarity configurable external interrupt.
Timer
2 enhanced 16-bit timer T0/T1, compatible with conventional 51;
1 timer T2 with capture function;
1 CRT for carrier modulation and demodulation;
1 envelope generator T168;
1 PWM generator T8 and 4-channel PWM available.
Serial communication interface
1 UART;
1 SPI;
1 I2C.
Analog
1 rail-to-rail analog comparator, with 16-level internal reference voltage (voltage source selectable: VDD or reference voltage) .
Support three low power operation Modes
Norma mode;
IDLE Mode;
STOP Mode, ISTOP<2uA @VDD=3V, TA=25°C.
Package Type
30-pin SSOP and TSSOP;
24-pin SSOP;
20-pin TSSOP.
Product Name | Package | Marking | Hazardous Substance Control | Packing Type |
---|---|---|---|---|
SC51F3364RV1G | SSOP-30-300-0.65 | 3364RV1G | Halogen free | Tube |
SC51F3364RV1GTR | SSOP-30-300-0.65 | 3364RV1G | Halogen free | Tape & Reel |
SC51F3364RE1G | SSOP-24-225-0.635 | 3364RE1G | Halogen free | Tube |
SC51F3364RE1GTR | SSOP-24-225-0.635 | 3364RE1G | Halogen free | Tape & Reel |
SC51F3364JV1G | TSSOP-30-225-0.5 | SC51F3364JV1G | Halogen free | Tube |
SC51F3364JV1GTR | TSSOP-30-225-0.5 | SC51F3364JV1G | Halogen free | Tape & Reel |
SC51F3364JT1G | TSSOP-20-225-0.65 | 3364JT1G | Halogen free | Tube |
SC51F3364JT1GTR | TSSOP-20-225-0.65 | 3364JT1G | Halogen free | Tape & Reel |
SC51F3364JU1G | TSSOP-24-225-0.65 | 3364JU1G | Halogen free | Tube |
SC51F3364JU1GTR | TSSOP-24-225-0.65 | 3364JU1G | Halogen free | Tape & Reel |